Canopy Instructions
Parts List
|
PARTS |
TENT SIZE |
|
|
16 x 16 through 20 x 20 |
20 x 30 |
|
| Side Pole | 8 | 10 |
| Center Pole | 1 | 2 |
| Stakes | 12 | 14 |
| Long Pole Segments | 10 | 14 |
| Short Pole Segments | 9 | 12 |
Instructions
| LAYOUT AT SITE
Spread drop cloths and unroll tent at exact position of desired finished assembly. Any sharp objects which must remain on site under the tent should be padded and taped. Assemble side poles and lay straight out from each pole hole in tent. Drive a stake 1'-0" from the end of each pole. Attach ropes loosely to stakes. |
 |
 |
RAISE
SIDE POLES
Start at opposite corners. Insert side poles into pole holes and raise so that bottom of poles slant toward center of tent. Adjust guy rope. Continue with other two corners and then sides. |
| RAISE
CENTER POLE
Assemble three piece center pole and insert into center pole hole. Raise to upright position and tie off jump rope to pole. |
 |
 |
SIDE
POLE ADJUSTMENT
Tighten guy ropes and then set side poles to upright position. Adjust pole positions and guy rope tension to properly pull out tent. Protective covers are recommended for all stakes. |
| TAKE
DOWN
Loosen all guy ropes. Spread drop cloths. Reverse steps 1 through 4 for disassembly. |